Filter
Top Products
The HBAnyware Utility User Manual Page 76
auth-cfgs
(continued)
However, since the parameter represents a table of entries the table can represent all entries
across all HBA instances. This allows all HBA instances to share a common table of entries.
auth-keys Description and Values: This is the DH-CHAP authentication key driver property for FC-SP
support. It is only valid when driver property enable-auth is set to 1. This driver property
should be ignored when enable-auth is set to 0. This property represents a table of entries.
The format of the table is:
"LWWN:RWWN:Ltype:Lkey:Rtype:Rkey",
"LWWN:RWWN:Ltype:Lkey:Rtype:Rkey",
"LWWN:RWWN:Ltype:Lkey:Rtype:Rkey",
The table can hold as many entries as needed.
LWWN: The WWPN of the local entity, i.e. HBA port. You should use the form of
NNNNNNNNNNNNNNNN, where NNNNNNNNNNNNNNNN is a 16 digit representation of the
Host port WorldWide Port Name. Or you could use 0000000000000000 to refer to local port
WWPN.
RWWN: The WWPN of the remote entity, i.e. Fabric controller or any remote Nport. You
should use the form of NNNNNNNNNNNNNNNN, where NNNNNNNNNNNNNNNN is a 16
digit representation of the Fabric Controller or Nport FFFFFFFFFFFFFFFF as generic remote
fabric port WWPN.
Ltype: The local key type. The type field can be 1 (ASCII text formatted key) or 2 (binary hex
formatted key).
Lkey: The local key to be associated with the local entity. For example a key of ASCII type
could look like: abcdefgh. A key of binary type could look like: 12ef58c98274d46.
Rtype: The remote key type. The type field can be 1 (ASCII text formatted key) or 2 (binary
hex formatted key).
Rkey: The remote key to be associated with the remote entity. For example a key of ASCII
type could look like: abcdefgh. A key of binary type could look like: 12ef58c98274d46.
You can use emlxsX-auth-keys to specify the per HBA instance DH-CHAP authentication
keys. Any valid setup in this way will overwrite the auth-keys setup. However, since the
parameter represents a table of entries the table can represent all entries across all HBA
instances. This allows all HBA instances to share a common table of entries.
console-
notices
0x00000000 0x00000000 0xFFFFFFFF Requires
reboot.
Verbose mask for notice
messages to the console.
console-
warnings
0x00000000 0x00000000 0xFFFFFFFF Requires
reboot.
Verbose mask for warning
messages to the console.
console-errors 0x00000000 0x00000000 0xFFFFFFFF Requires
reboot.
Verbose mask for error
messages to the console.
Table 4: emlxs.conf Parameters (Continued)
Property
Name
Default Min Max Activation Comments