Filter
Top Products
The HBAnyware Utility User Manual Page 144
In the ASG tree of the Access Sub-Groups
tab, one or more of the names of the ASGs
is displayed as "- ASG (Client Offline) -".
The client system for the ASG was not discovered
when the Configurator was started. This is actually a
symptom of two different problems.
• All Servers Are Not Displayed
• New Keys Were Generated While Servers Were Offline
See Table 22 on page 147 for details regarding these
problems.
Not All Servers are available to an ASG.
When you create a new ASG or modify an
existing ASG, not all of the servers in the ACG
are available to be added to the ASG.
A client system can be connected to more than one fabric.
While the system the Security Configurator is running on
may be able to access all of the servers in its ACG, it is not
necessarily the case that the selected client for the ASG can
access all of the servers. Only those that can be accessed
by the selected server will be available.
Table 19: HBAnyware Security Configurator - Access Sub-Groups Situations (Continued)
Situation Resolution