Filter
Top Products
The HBAnyware Utility User Manual Page 31
Loop Map Area
• The loop map shows the different ports present in the loop, and is present only if the port (HBA)
is operating in loop mode. The simplest example would be to connect a JBOD directly to an
HBA. When this is done, the port type will be a private loop, and the loop map will have an entry
for the HBA, and one entry for each of the disks in the JBOD.
Viewing Fabric Information
Discovery Information contains information about the selected fabric.
To view the fabric information:
1. Do one of the following:
• From the menu bar, click View, then click Sort by Fabric ID.
• From the toolbar, click the Sort by Fabric ID button: .
2. Click on a fabric address in the discovery-tree. The Discovery Information tab shows information
about the selected fabric.
Figure 18: Discovery Information
Discovery Information Field Definitions
• Number of Hosts - The number of hosts discovered or seen by this host on the selected fabric.
• Number of Fabrics - The number fabrics identified during discovery.
• Number of Adapters - The number of HBAs discovered by this host on the selected fabric.
• Number of Target Ports - The number of storage devices seen by this host on the selected
fabric.