Filter
Top Products
The HBAnyware Utility User Manual Page 115
Diagnostics
Performing Diagnostic Tests
Use the Diagnostics tab to do the following:
• Run these tests on Emulex HBA's installed in the system:
• PCI Loopback (see page 119)
• Internal Loopback (see page 119)
• External Loopback (see page 119)
• Power-On Self Test (POST) (see page 116)
• Echo (End-to-End) (see page 121)
• Quick Test (see page 116)
• Perform a diagnostic dump (see page 117)
• View PCI registers and wakeup parameter (see page 118)
• Control HBA beaconing (see page 116)
Figure 53: Diagnostics tab
Note: All diagnostic tests and diagnostic dumps can only be performed on the local system
or on remote systems connected with TCP/IP access. Diagnostic tests and
diagnostic dumps cannot be performed on remote systems connected with FC
access.
Note: Diagnostics are not available on VMware ESX Server.