Filter
Top Products
The HBAnyware Utility User Manual Page 78
num-nodes 0
0 4096 Requires
HBA reset.
Number of FC nodes
(NPorts) the driver will
support.
pci-max-read 2048
512 4096 Requires
HBA reset
Sets the PCI-X max
memory read byte count
[512, 1024, 2048 or 4096]
pm-support 0 .
0 1 Requires
reboot.
Enable/Disable power
management support in the
driver.
0 = Disables power
management support in the
driver.
1 = Enables power
management support in the
driver.
ub-bufs
1000 40 16320 Requires
reboot.
Sets the number of
unsolicited buffers to be
allocated.
topology 0 0 =loop, then P2P
2 =P2P only
4 =loop only
6 =P2P, then loop
Requires
link reset.
Set to point-to-point mode if
you want to run as an
N_Port. Set to loop mode if
you want to run as an
NL_Port.
Table 4: emlxs.conf Parameters (Continued)
Property
Name
Default Min Max Activation Comments