Filter
Top Products
The HBAnyware Utility User Manual Page 82
log-notices Min: 0x00000000
Max:0xFFFFFFFF
Default: 0x0000000
Verbose mask for notice
messages to the messages
file.
log-verbose Min:0x0
Max:0xffff
Default:0x0
(bit mask) When set to
nonzero this variable causes
LPFC to generate additional
messages concerning the
state of the driver and the
I/O operations it carries out.
These messages may go to
the system log file,
/var/adm/messages.
N/A
log-warnings Min: 0x00000000
Max:0xFFFFFFFF
Default: 0x0000000
Verbose mask for warning
messages to the messages
file.
log-verbose Min:0x0
Max:0xffff
Default:0x0
(bit mask) When set to
nonzero this variable causes
LPFC to generate additional
messages concerning the
state of the driver and the
I/O operations it carries out.
These messages may go to
the system log file,
/var/adm/messages.
N/A
log-errors Min: 0x00000000
Max:0xFFFFFFFF
Default: 0x0000000
Verbose mask for error
messages to the messages
file.
log-verbose Min:0x0
Max:0xffff
Default:0x0
(bit mask) When set to
nonzero this variable causes
LPFC to generate additional
messages concerning the
state of the driver and the
I/O operations it carries out.
These messages may go to
the system log file,
/var/adm/messages.
N/A
network-on Min:0 (Disables)
Max:1 (Enables)
Default:1
Description: Enables or
disables IP networking
support in the driver.
network-on Min:0 (Disables)
Max:1 (Enables)
Default: 0
Description: Controls
whether LPFC provides IP
networking functionality over
FC. This variable is Boolean:
when zero, IP networking is
disabled: when non-zero, IP
networking is enabled.
The LPFC
parameter
enables or
disables FCIP on
the Emulex HBA
Table 5: Solaris emlxs (SFS) and Solaris LPFC Driver Parameter Cross-Reference (Continued)
Solaris
emlxs/
HBAnyware
Property
Solaris emlxs/HBAnyware
Min/Max, Defaults and
Description
Related
LPFC
Property
LPFC Min/Max, Default and
Description
Comments