Filter
Top Products
System E rrors
Calibration Errors
NOTE: In some e
rror codes listed below, a # symbol is shown as the last digit. This symbol represents the
applicable co
mponent number, which can vary. The unit’s display will show the applicable number as the last
digit in the co
de. For example, the ENT# code listed in this table will be displayed as ENT1 if the affected
component is p
ump 1, ENT2 for pump 2, and so on.
Code
Type Name Description
END#
Record
Calibration
Pump #
A calibration test was run on the pump.
ENS0
Record
Calibration Solvent Meter
A calibration test was run on the solvent
meter.
ENT#
Record
Calibratio
nStallTestPump
#
A stall test
was completed successfully
on pump #.
100 332564B