Graco 332564B Paint Sprayer User Manual


 
Warnings
WARNING
INTRINSIC SAFETY
Intrinsical
ly safe equipment that is installed improperly or connected to non-intrinsically safe
equipment wi
ll create a hazardous condition and can cause fire, explosion, or electric shock.
Follow local
regulations and the following safety requirements.
Be sure your installation complies with national, state, and local codes for the installation of
electrical apparatus in a Class I, Group D, Division 1 (North America) or Class I, Zones 1
and 2 (Europe) Hazardous Location, including all of the local safety fire codes (for example,
NFPA 33, NEC 500 and 516, OSHA 1910.107, etc.).
To help prev
ent fire and explosion:
Do not install equipment approved only for a non-hazardous location in a hazardous
location. See model ID label for the intrinsic safety rating of your model.
Do not substitute system components as this may impair intrinsic safety.
•Equipment
that comes in contact with the intrinsically safe terminals must be rated for Intrinsic
Safety. T
his includes DC voltage meters, ohmmeters, cables, and connections. Remove the
unit from
the hazardous area when troubleshooting.
SKIN INJECTION HAZARD
High-pr
essure fluid from dispensing device, hose leaks, or ruptured components will pierce
skin. Th
is may look like just a cut, but it is a serious injury that can result in amputation. Get
immedia
te surgical treatment.
Do not point dispensing device at anyone or at any part of the body.
•Donotp
ut your hand over the fluid outlet.
Do not stop or deflect leaks with your hand, body, glove, or rag.
Follow the Pressure Relief Procedure when you stop dispensing and before cleaning,
checking, or servicing equipment.
•Tight
en all fluid connections before operating the equipment.
Check hoses and couplings daily. Replace worn or damaged parts immediately.
MOVING PARTS HAZARD
Moving parts can pinch, cut or amputate fingers and other body parts.
Keep clear of moving parts.
Do not operate equipment with protective guards or covers removed.
•Pres
surized equipment can start without warning. Before checking, moving, or servicing
equi
pment, follow the Pressure Relief Procedure and disconnect all power sources.
TOX
IC FLUID OR FUMES
Tox
ic fluids or fumes can cause serious injury or death if splashed in the eyes or on skin,
inh
aled, or swallowed.
Read MSDSs to know the specific hazards of the fluids you are using.
•St
ore hazardous fluid in approved containers, and dispose of it according to applicable
gu
idelines.
Always wear chemically impermeable gloves when spraying, dispensing, or cleaning
equipment.
332564B
7