Filter
Top Products
Setup Mode Scree
ns
Maintenance S
creens
Maintenance Screen 1
Use this screen to set maintenance intervals. Set
to 0 to disable the alarm.
NOTE: The Pum
p Stall Test cannot be disabled. You
must enter a
value other than 0.
Figure 48 Maintenance Screen 1, Interval Settings
Maintenance Screen 2
Maintenance screen 2 shows the current interval
status of the solvent meter, fluid filter, and air filter.
Press and hold the Reset button
for 1-2
seconds to clear the alarm and reset the counter.
Fi
gure 49 Maintenance Screen 2, Current Status
Maintenance Screen 3
Maintenance screen 3 shows the current interval
status of the pump maintenance tests.
Press and hold the Reset button
for 1-2
seconds to clear the alarm and reset the counter.
NOTE: ThePumpStallTestcanonlyberesetby
successfully completing the test.
Figure 50 Maintenance Screen 3, Current Pump
Status
80 332564B