Filter
Top Products
Setup Mode Scree
ns
System Screen
4
System screen 4 sets the following system operating
parameters.
Figure 31 System Screen 4
Gateway ID
Select the desired Gateway ID from the dropdown
menu.
Enable
Uncheck Enable while setting the IP Address, Subnet
mask, Gateway, DNS1 or DNS2. When the settings
are loaded, check the Enable box to write the new
settings to the selected Gateway.
Checkthisb
ox to enable the selected Gateway so
that the PLC
can communicate with it.
DHCP
Select thi
s box if your system has a Dynamic Host
Configurat
ionProtocol(DHCP).Thisprotocolassigns
unique IP a
ddresses to devices, then releases and
renews the
se addresses as devices leave and rejoin
the netwo
rk. If selected, the IP Address, Subnet, and
Gateway fi
elds will not be editable and will display
the addre
sses supplied by the DHCP.
TCP/IP
Use the r
emaining fields to set the IP address, subnet
mask, Ga
teway, DNS1, and DNS2.
70 332564B