Graco 332564B Paint Sprayer User Manual


 
Technical Data
Technical Data
Positive Displacement
Proportioner
U.S.
Metric
Maximum fluid working
pressure:
AC1000 Air Spray
Systems
300 psi 2.1 MPa, 21 ba
r
AC2000 Air-Assisted
Spray Systems
1500 psi 10.5 MPa, 10
5bar
Maximum wo
rking air
pressure:
100 psi 0.7 MPa, 7.
0bar
Air supply: 85–100 psi
0.6–0.7 M
Pa, 6.0–7.0 bar)
Air filter
inlet size:
3/8 npt(f
)
Air filtr
ation for air logic
(user-s
upplied):
5micron
(minimum) filtration required; clean and dry air
Air filt
ration for atomizing
air (us
er-supplied):
30 micr
on (minimum) filtration required; clean and dry air
Mixing ratio range:
0.1:1
50:1, ±1%
Fluids handled:
one or
two component:
solvent and waterborne paints
polyurethanes
epoxies
acid catalyzed varnishes
moisture sensitive isocyanates
Viscosity range of fluid:
20–
5000 centipoise
Fluid filtration
(user-supplied):
10
0meshminimum
Maximum fluid flow: 800 cc/minute (depending on material viscosity)
F
luid outlet size:
1/4 npt(m)
E
xternal power supply
requirements:
9
0 - 250 Vac, 50/60 Hz, 7 amps maximum draw
15 amp maximum circuit breaker required
8 to 14 AWG power supply wire gauge
Operating temperature
range:
36 to 122°F 2 to 50°C
Storage temperature
range:
—4 to 158°F —20 to 70°C
Weight (approximate):
195 lb 88 kg
Sound data: Less than 75 dB(A)
Wetted parts:
17–4PH, 303, 304 SST, Tungsten carbide (with nickel binder),
perfluoroelastomer; PTFE, PPS, UHMWPE
332564B 103