Advanced Displa
yModule(ADM)
Soft Key Icons
The following icons appear in the ADM display,
directly to the left or right of the soft key which
activates that operation.
NOTICE
To prevent damage to the softkey buttons, do not
press the buttons with sharp objects such as pens,
plastic cards, or fingernails.
Table 2 : Soft Key Functions
Key Function
Enter Screen
Press to enter screen for editing. Highlights editable
data on a screen. Use Up/Down arrows to move
between data fields on the screen.
Exit Screen
Press to e
xit screen after editing.
Accept
Press to accept calibration value.
Cancel
Press to cancel or reject calibration value.
Prime Pump
Press to start a pump priming procedure.
Line/Fill/Run
Press to start a line fill procedure.
Mix
Press to start a spray procedure.
Purge
Press to start a purge procedure.
1
4
332564B