Filter
Top Products
Run Mode Screens
RunModeScree
ns
NOTE: Selection fields and buttons that are
grayed-out on the screens are not currently active.
Opening Screen
At power up,
the Graco logo will display for
approximat
ely 5 seconds, followed by the Home
screen.
Figure 14 Opening Screen
Home Screen
The Home screen displays the current status of the
system. The following table details the information
shown.
To view pump flow rates and pressures
(as shown), select “Diagnostic Mode” on
System Screen 1, page 67.
Figure 15 Home Screen, in Mix Mode with
Diagnostics On
58 332564B