Filter
Top Products
Advanced Displa
yModule(ADM)
USB Upload Pro
cedure
Use this procedure to install a system configuration
file and/or a custom language file.
1. If necessary
, follow the USB Download
Procedure, t
o automatically generate the proper
folder struc
ture on the USB flash drive.
2. Insert the US
B flash drive into the USB port of
the compute
r.
3. The USB flash
drive window automatically opens.
If it does no
t, open the USB flash drive from
within Win
dows Explorer.
4. Open the Gr
aco folder.
5. Open the sy
stem folder. If working with more
than one sy
stem, there will be more than one
folder wi
thin the Graco folder. Each folder is
labeled w
ith the corresponding serial number of
the ADM. (
The serial number is on the back of
the modul
e.)
6. If installing the system configuration settings file,
place SETTINGS.TXT file into UPLOAD folder.
7. If installing the custom language file, place
DISPTEXT.TXT file into UPLOAD folder.
8. Remove the USB flash drive from the computer.
9. Install the USB flash drive into the USB port of
the ProMix PD2K system USB port.
10. During the upload, USB BUSY displays on the
screen.
11. Remove the USB flash drive from the USB port.
NOTE: If the custom language file was installed,
users can now select the new language from the
Language drop-down menu in the Advanced Setup
Screen 1.
1
2
332564B