Filter
Top Products
Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC
Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC
INSTALLATION
A-2 A-2
SQUARE WAVE TIG 355
TECHNICAL SPECIFICATIONS - SQUARE WAVE TIG 355
INPUT - SINGLE PHASE ONLY
Input Voltages: 208 230 460 575
Input Currents
@ 350A/34 VDC 110 100 50 40
RATED OUTPUT
Duty Cycle Amps Volts at Rated Amperes
40% Duty Cycle 350 34 v
60% Duty Cycle 300 32 v
100% Duty Cycle 220 29 v
OUTPUT
Maximum Open Continuous
Circuit Voltage Current Range Auxiliary Power
80 Volts Max. 2-400 Amps AC and DC 115 VAC
15 Amps Continuous
RECOMMENDED INPUT WIRE AND FUSE SIZES
Type 75°C Type 75°C
Fuse Input Type75°C Copper Ground Type 75°C Copper Ground Fuse
Input (Super Lag) Ampere Copper Wire in Wire in Conduit Copper Wire in Wire in Conduit (Super LAG)
Voltage / or Breaker Rating on Conduit AWG AWG (IEC) Input Conduit AWG AWG (IEC) or Breaker
Frequency Size Nameplate (IEC) Sizes Sizes Amperes (IEC) Sizes Sizes Size
208/60 150 110 4 (25mm
2
) 6 (16mm
2
) 148 2 (35mm
2
) 6 (16mm
2
) 200
230/60 125 100 6 (16mm
2
) 6 (16mm
2
) 134 2 (35mm
2
) 6 (16mm
2
) 175
460/60 60 50 8 (10mm
2
) 10 (6mm
2
) 67 6 (16mm
2
) 8 (10mm
2
)80
575/60 50 40 8 (10mm
2
) 10 (6mm
2
) 54 6 (16mm
2
) 8 (10mm
2
)70
PHYSICAL DIMENSIONS
Height Width Depth Weight
884 mm 565 mm 660 mm 232 kg
34.84 in. 22.25 in. 26.00 in. 510 lbs.
OPERATING TEMPERATURE RANGE STORAGE TEMPERATURE RANGE
0° to 40°C -50° to 85°C
For all Stick, DC TIG, and Balanced AC TIG
Welding at 350A/34V/40% Duty Cycle Based
on the 1990 U.S. National Electrical Code
For Unbalanced AC TIG Welding Above 230 Amps,
300/32V/60% Duty Cycle, Unbalance Based on the
1990 U.S. National Electrical Code