Filter
Top Products
AUXILIARY TRANSFORMER NO. 2 REMOVAL AND
REPLACEMENT PROCEDURE (continued)
REPLACEMENT PROCEDURE
1. Carefully place the transformer into the V450-
PRO.
2. Install the two mounting screws that hold the
transformer to the machine base using the 3/8”
nut driver.
3. Connect plugs P50, P51 and P52.
4. Connect any leads and install cable ties as nec-
essary.
5. Install the case back using the 3/8” nut driver.
6. Install the case top, sides, and input access
panel using the 3/8” nut driver.
TROUBLESHOOTING AND REPAIR
F-69 F-69
INVERTEC® V450-PRO
Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC
Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC