NETGEAR D6400 Saw User Manual


 
Manage the WiFi Network Settings
103
AC1600 WiFi VDSL/ADSL Modem Router Model D6400
The user name is admin. The default password is password. The user name and
password are case-sensitive.
4. Click the OK button.
The BASIC Home page displays.
5. Select ADVANCED > WPS Wizard
.
The page displays a description of the WPS method.
6. Click the Next button.
By default, the Push Button (recommended) radio button is selected.
7. Either click the
button onscreen or press the WPS button on the right side panel of the
modem router for three seconds.
For two minutes, the modem router attempts to find the WiFi device (that is, the client)
that you want to join the modem router’s main WiFi network.
During this time, the WiFi LED on the front panel of the modem router blinks blue.
8. Within two minutes, go to the WiFi device and press its WPS button to join the modem
router’s main WiFi network without entering a password.
After the modem router establishes a WPS connection, the WiFi LED lights solid blue and
the Add WPS Client page displays a confirmation message.
9. To verify that the WiFi device is connected to the modem router’s main WiFi network, select
BASIC > Attached Device
.
The WiFi device displays onscreen.
Use WPS with the PIN Method
To use the PIN method to connect a WiFi device to the modem router’s WiFi network, you
must know the PIN of the WiFi device that you are trying to connect.