Filter
Top Products
Manage the WAN and LAN Network Settings
214
AC1600 WiFi VDSL/ADSL Modem Router Model D6400
When you first configured your modem router, two implicit static routes were created. A
default route was created with your ISP as the gateway and a second static route was
created to your local network for all 192.168.0.x addresses. With this configuration, if you
attempt to access a device on the 134.177.0.0 network, your modem router forwards your
request to the ISP. The ISP forwards your request to the company where you are employed,
and the request is likely to be denied by the company’s firewall.
In this case, you must define a static route, instructing your modem router that 134.177.0.0 is
accessed through the ISDN modem router at 192.168.0.100. Here is an example:
• Through the destination IP address and IP subnet mask, specify that this static route
applies to all 134.177.x.x addresses.
• Through the gateway IP address, specify that all traffic for these addresses is forwarded
to the ISDN modem router at 192.168.0.100.
• A metric value of 1 works fine because the ISDN modem router is on the LAN.
Set Up a Static Route
You can add a static route to a destination IP address and specify the subnet mask, gateway
IP address, and metric.
To set up a static route:
1. Launch a web browser from a computer or WiFi device that is connected to the network.
2. T
ype http://www
.routerlogin.net.
A login window opens.
3. Enter the user name and password for the modem router.
The user name is admin.
The default password is
password. The user name and
password are case-sensitive.
4. Click the OK button.
The BASIC Home page displays.
5. Select ADVANCED >
Advanced Setup > Static Routes.