NETGEAR D6400 Saw User Manual


 
Install and Access the Modem Router and Its Network
24
AC1600 WiFi VDSL/ADSL Modem Router Model D6400
If the Configuring the Internet Connection page displays, skip to Step 14. If it does not
display, do the following:
a. In the address field of the web browser, enter www.routerlogin.net.
b. When prompted, enter admin for the user name and password for the password.
If the Configuring the Internet Connection page displays, skip to Step 14. If it still does not
display, see Step 13.
13. If the browser cannot display the web page, do the following:
Make sure that the computer is connected to one of the four Ethernet LAN ports or
over WiFi to the modem router.
Make sure that the Power LED
of the modem router is lit green.
Make sure that your browser does not cache the previous page by closing and
reopening the browser.
Clear the browser cache.
If the computer is set to a static or fixed IP address (this setting is uncommon), either
change the computer to obtain an IP address automatically from the modem router
through DHCP
, or change the IP address of the computer to a static or fixed IP
address in the 192.168.0.2–192.168.0.254 range.
14. From the Country menu, select the country in which you use the modem router.
15. From the ISP menu, select the ISP that you are using.
If your ISP is not in the menu, select
Other.
16. Select the Ye
s radio button.
17. Click the Next button.
The Setup Wizard searches your Internet connection for servers and protocols to
determine your ISP configuration.