Filter
Top Products
Manage the Internet Settings Manually
64
AC1600 WiFi VDSL/ADSL Modem Router Model D6400
12. Enter the VDSL settings as described in the following table.
Field Description
Multiplexing Method
These settings are disabled because they do not apply to a VDSL
connection.
VPI
VCI
Use VLANID Select the Use VLANID check box and enter the VLAN ID, as indicated by
your ISP
.
A VLAN ID might be required if you subscribe to both Internet service and
IPTV service. In some unusual situations, a VLAN ID is required for VDSL
Internet service. If your ISP did not provide you with a VLAN ID, leave the
Use VLANID
check box cleared, which is the default setting.
For information about setting up VLAN tag groups, see Set Up a Bridge for
a VLAN Tag Group on page 198.
Priority (802.1p) If your ISP provided you with a VLAN ID and a priority value, enter the
priority value, which is a number from 0 to7.
You can enter a priority value only in combination with a VLAN ID. If your
ISP did not provide you with a priority value, leave the default setting (0).
Bridge Mode (bind LAN4 to
W
AN2)
This setting is an option that applies to the IPTV interface only
. To bind LAN
port 4 to the IPTV interface (that is, the WAN2 virtual interface), select the
Bridge Mode (bind LAN4 to WAN2) check box.
For more information, see Enable Bridge Mode for an IPTV Device on
page 200.
Encapsulation For a PPP over Ethernet (PPPoE) connection, select PPPoE from the
menu.
Note: PPP over ATM (PPPoA) is not supported for a VDSL connection.
Login Enter the login name that you use to log in to your Internet service, as
indicated by your ISP
.
This login name is often an email address.
Password Enter the password that you use to log in to your Internet service, as
indicated by your ISP
.
Service Name (If Required) Enter the service name that you use to log in to your Internet service, as
indicated by your ISP.
Often, a service name is not required.
Connection Mode Select how the Internet connection functions:
• Always On
. Once the Internet connection is established, it remains on.
This is the default setting.
• Dial on Demand. When someone attempts to connect to the Internet,
the Internet connection is established. When the idle time-out period
expires, the Internet connection is terminated.
• Manually Connect.
Y
ou must connect to the Internet manually (see
View, Renew, or Release a TCP/IP Internet Connection on page 232 or
View, Connect, or Disconnect a PPPoE or PPPoA Internet Connection
on page 234).