Filter
Top Products
Manage the Internet Settings Manually
51
AC1600 WiFi VDSL/ADSL Modem Router Model D6400
14. Click the Apply button.
Your settings are saved.
15. Click the Test
button to test your Internet connection.
If the NETGEAR website does not display within one minute, see Troubleshoot the
Internet Connection on page 276.
Use IP over ATM (IPoA) Enter the IP address, IP subnet mask, and gateway IP address that your
ISP assigned you for IPoA service. The gateway is the ISP router to which
your modem router connects.
Domain Name Server (DNS) Address
The DNS server is used to look up site addresses based on their domain names.
Get Automatically from ISP Your ISP uses DHCP to assign your DNS servers. Your ISP automatically
assigns this address.
Use These DNS Servers If you know that your ISP does not automatically transmit DNS addresses
to the modem router during login, select this option and enter the IP
address of your ISP primary DNS server
. If a secondary DNS server
address is available, enter it also.
NA
T (Network Address Translation)
NAT allows computers on your home network to share the modem router Internet connection. NAT is
enabled by default because it is required in most situations. Select the NA
T setting:
• Enable. NA
T is enabled. This is the default setting. Leave this setting if no reason to disable NAT
exists.
• Disable. NA
T is disabled.
Router MAC
Address
The Ethernet MAC address that the modem router uses on the Internet port. Some ISPs register the MAC
address of the network interface card in your computer when your account is first opened.
They accept
traf
fic only from the MAC address of that computer. This feature allows your modem router to use your
computer’s MAC address (also called cloning).
Use Default Address Use the default MAC address.
Use Computer MAC Address The modem router captures and uses the MAC address of the computer
that you are now using.
Y
ou must use the one computer that is registered
by the ISP.
Use This MAC Address Enter the MAC address that you want to use. By default, the field displays
the MAC address of the Internet port.
DHCP Options
Vendor Class Identifier String
(option 60)
Enter the vendor class identifier (VCI) string, as indicated by your ISP.
If your ISP did not provide you with a VCI string, leave this field blank.
Client Identifier String
(option 61)
Enter the client identifier (client ID) string, as indicated by your ISP.
If your ISP did not provide you with a client ID string, leave this field blank.
Field Description