Filter
Top Products
Manage the WAN and LAN Network Settings
196
AC1600 WiFi VDSL/ADSL Modem Router Model D6400
6. Configure a VLAN for the virtual Internet interface:
a. From the menu above the Enable This Interface check box, select Internet.
b. Make sure that the Enable This Interface check box is selected.
By default, the check box is selected for the virtual Internet interface.
c. Select the Use VLANID check box.
d. Enter a VLAN ID that applies to the virtual Internet interface.
The VLAN ID can be in a range from 0 to 4094. The default VLAN ID is 0.
e. T
o specify a priority for the VLAN, in the Priority (802.1p)
field, enter a value from 0
to 7.
f. Click the Apply button.
Your settings are saved for the virtual Internet interface.
7. Configure a VLAN for the virtual IPTV interface:
a. From the menu above the Enable This Interface check box, select IPTV.
b. Select the Enable This Interface check box.
By default, the check box is cleared for the virtual IPTV interface. However, if you
already enabled the virtual IPTV interface (see Chapter 3, Manage the Internet
Settings Manually), the check box is selected.
c. Select the Use VLANID check box.
d. Enter a VLAN ID that applies to the virtual IPTV interface.
The VLAN ID can be in a range from 0 to 4094. The default VLAN ID is 0.
e. T
o specify a priority for the VLAN, in the Priority (802.1p)
field, enter a value from 0
to 7.
f. Click the Apply button.
Your settings are saved for the virtual IPTV interface.
Set Up a Bridge for a Port Group or VLAN Tag Group
Some devices, such as an IPTV, cannot function behind the modem router’s network address
translation (NAT) service or firewall. Based on what your Internet service provider (ISP)
requires, for the device to connect to the ISP’s network directly, you can enable the bridge
between the device and the modem router’s Internet port or add new VLAN tag groups to the
bridge.
Note: If your ISP provides directions on how to set up a bridge for IPTV and
Internet service, follow those directions.