Q-Logic ISR6250 Router User Manual


 
C – Log Messages
C-4 SN0051103-00 A
S
41272 QLIS_LoginPduContinue:
CONN_STATE_IN_LOGIN, Unknown InitTaskTag
App Error iSCSI Login PDU received with an incorrect initiator
task tag for a session which is partially logged in. This
would occur if a login PDU other than the initial login
PDU used an initiator task tag which was different
than the initiator task tag provided in the initial login
PDU.
41283 QLIS_LoginPduContinue: TSIH 0x%x out of
range
App Error iSCSI login PDU was received with a target session
identifying handle (TSIH) out of range. This would
occur if the iSCSI initiator attempting the login failed
to used the TSIH value provided in the Target Login
Response PDU (router is target) in subsequent login
PDUs.
41284 QLIS_LoginPduContinue: Session does not
exist, invalid TSIH 0x%x
App Error iSCSI Login PDU was received with an invalid TSIH
value. The TSIH is invalid because there is no ses-
sion with that TSIH value. This would occur if the
iSCSI initiator attempting the login failed to used the
TSIH value provided in the target login response
PDU (router is target) in subsequent login PDUs.
41353 QLIS_LoginPduContinue: Session does not
exist, invalid TSIH 0x%x
App Error iSCSI Login rejected due to a CHAP authentication
error.
41354 QLIS_LoginPduContinue: Unexpected CHAP
key detected
App Error iSCSI Login rejected due to a CHAP key error
Table C-1. All iSR6250 Router Log Messages (Continued)
ID Log Message
Module
Type
Msg.
Type
Description