Q-Logic ISR6250 Router User Manual


 
Configuration
Enabling Virtual Port Groups
SN0051103-00 A 4-7
A
The following example shows the information grouped by physical FC port.
iSR6200 <1> (admin) #> show fc
FC Port Information
---------------------
FC Port 1
Port Status Enabled
Link Status Up
Current Link Rate 4Gb
Programmed Link Rate Auto
WWNN 20:00:00:c0:dd:13:16:f8 (VPGROUP_1)
WWPN 21:00:00:c0:dd:13:16:f8 (VPGROUP_1)
Port ID 0a-04-00 (VPGROUP_1)
WWNN 20:01:00:c0:dd:13:16:f8 (VPGROUP_2)
WWPN 21:01:00:c0:dd:13:16:f8 (VPGROUP_2)
Port ID 0a-04-01 (VPGROUP_2)
WWNN 20:02:00:c0:dd:13:16:f8 (VPGROUP_3)
WWPN 21:02:00:c0:dd:13:16:f8 (VPGROUP_3)
Port ID 0a-04-02 (VPGROUP_3)
Firmware Revision No. 4.05.00
Frame Size 2048
Execution Throttle 32768
Connection Mode Point-to-Point
Programmed Connection Option Loop Preferred
SFP Type 8Gb
FC Port 2
Port Status Enabled
Link Status Up
Current Link Rate 4Gb
Programmed Link Rate Auto
WWNN 20:00:00:c0:dd:13:16:f9 (VPGROUP_1)
WWPN 21:00:00:c0:dd:13:16:f9 (VPGROUP_1)
Port ID 0a-05-00 (VPGROUP_1)
WWNN 20:01:00:c0:dd:13:16:f9 (VPGROUP_2)
WWPN 21:01:00:c0:dd:13:16:f9 (VPGROUP_2)
Port ID 0a-05-01 (VPGROUP_2)
WWNN 20:02:00:c0:dd:13:16:f9 (VPGROUP_3)
WWPN 21:02:00:c0:dd:13:16:f9 (VPGROUP_3)