Filter
Top Products
Introduction
iSR6250 Router Blades
SN0051103-00 A 1-5
A
iSR6250 Router Blades
Each chassis supports one or two blades. The blades are hot-pluggable. The
base configuration of iSR6250 router blade has a dual core CPU, 1024 MB
memory, boot flash, and internal and external I/O ports. (For detailed
specifications, see Appendix A.)
The following sections illustrate and describe the physical features and
functionality of the iSR6250 router blades:
“10GbE iSCSI Ports” on page 1-5
“Router Blade LEDs” on page 1-6
“Maintenance Button” on page 1-7
“Fibre Channel Port LEDs” on page 1-9
“Fibre Channel Transceivers” on page 1-11
“Gigabit Ethernet Port LEDs” on page 1-11
“Ethernet Port—Management” on page 1-12
“Serial Port” on page 1-12
10GbE iSCSI Ports
The iSR6250 router blade has two 10Gb Ethernet ports, located in the expansion
slot. Each port has the following capacity:
10GbE iSCSI ports that run in full duplex mode
Support for jumbo frames
IPv4 and IPv6 protocol support
iSCSI header and data digest in the software
Figure 1-5 10Gb Ethernet Ports on the iSR6250 Router Blade