Filter
Top Products
Installation
Installing the iSR6250 Router
SN0051103-00 A 3-7
A
Install the Transceivers
The router supports a variety of SFP transceivers.
To install a transceiver, insert the transceiver into the port and gently press
until it snaps in place.
To remove a transceiver, gently press the transceiver into the port to release
tension, then pull the release tab or lever and remove the transceiver.
Different transceiver manufacturers have different release mechanisms.
Consult the documentation for your transceiver.
Install the Chassis
Slide the chassis and rail assembly into the rack
rails.
Fasten the chassis to the rack with two 10-32 x
3/8 screws: one through each chassis rail flange.
1. Screws, 10-32x3/8
NOTE:
The transceiver fits only one way. If the transceiver does not install under
gentle pressure, flip it over and try again.
1
1