Filter
Top Products
C – Log Messages
C-6 SN0051103-00 A
S
41717 QLBI_Passthru: Invalid data length %d
bytes
App Error Pass-Through command issued by management
application (such as GUI) was interrupted or timed
out.
41750 QLBI_Ioctl: ERROR: Operation (0x%x) not
supported in this mode
App Error IOCTL operation unsupported. Operation code pro-
vided in log message.
41768 QLBI_GetLunList: REPORT LUNS command
failed
App Error Report LUNs command failed. The Report LUNs
command was issued by the router as part of its dis-
covery process.
41769 QLBI_GetLunList: REPORT LUNS command
failed with CHECK CONDITION, SCSI STATUS
0x%02X
App Error Report LUNs command failed with check condition
status. The Report LUNs command was issued by
the router as part of its discovery process.
41771 QLBI_GetLunList: Lun allocation failed
for LunId %d
App Error Failed to allocate LUN object; out of resources.
41994 QLFC_Login: VpIndex (%d) out of range App Error Login attempted using FC virtual port (VP) index that
is out-of-range (range = 0–31). Index reported in log
message.
41995 QLFC_Login: VP Index 0x%x not configured App Error Login attempted using FC VP index that has not been
configured. Operation attempted on an unconfigured
VP.
42002 QLFC_Login: Can't open connection App Error Attempting login but FC connection cannot be
opened.
42024 QLFC_Logout: No active path to device.
WWPN:
%.2X%.2X%.2X%.2X%.2X%.2X%.2X%.2X
App Error Attempting logout of device for which there is no
active path (WWPN not found).
Table C-1. All iSR6250 Router Log Messages (Continued)
ID Log Message
Module
Type
Msg.
Type
Description