Filter
Top Products
C – Log Messages
SN0051103-00 A C-19
A
107078 #%d: QLUpdatePort 0x%x: out of slots in
host database
FC Error The driver was unable to re-establish connection to
the target within the timeout and retry counts, and is
therefore marking it offline.
107984 #%d: QLWriteFlashDword: Write fails at
addr 0x%x data 0x%x
FC Error The FC controller failed a Flash write (address x data
x).
108032 #%d: QLGetVpDatabase:
MBOX_CMD_GET_VP_DATABASE for VP %d fatal
error
FC Error The FC controller failed the Get VP Database com-
mand (for virtual port %d).
108033 #%d: QLGetVpDatabase:
MBOX_CMD_GET_VP_DATABASE for VP %d failed
%x
FC Error The FC controller failed the Get VP Database com-
mand (for virtual port %d) with status x.
108049 #%d: QLVerifyMenloFw:
EXECUTE_COMMAND_IOCB failed MB0 %x MB1 %x
FC Error The FC controller reported failure status for an Exe-
cute IOCB (input/output control block) command.
108050 #%d: QLVerifyMenloFw:
EXECUTE_COMMAND_IOCB fatal error
FC Error The FC controller reported a fatal error while pro-
cessing an Execute IOCB command.
108064 #%d: QLGetFwState: Get Firmware State
failed 0-3 %x %x %x %x
FC Error The FC controller reported failure status for a Get
Firmware State command.
118882 #%d: QLIoctlDisable: Reset adapter FC Info Request to reset the FC processor (adapter) received
from ioctl interface.
119088 #%d: QLIsrEventHandler: LIP occurred
(%x): mailbox1 = %x
FC Info FC loop initialization process (LIP) occurred. The LIP
type is reported, as is the contents of the FC proces-
sor’s mailbox 1 register.
Table C-1. All iSR6250 Router Log Messages (Continued)
ID Log Message
Module
Type
Msg.
Type
Description