Filter
Top Products
Removal/Replacement
iSR6250 Chassis Blades
6-2 SN0051103-00 A
S
iSR6250 Chassis Blades
The iSR6250 router provides an enhanced facility you can use to replace any
blade in the field. When you replace a blade, it automatically restores all the
configuration data from the other blade.
The following sections show how to remove and replace a failed blade in the
iSR6250 dual-blade chassis:
“Removing the Failed Blade” on page 6-2
“Installing a New Replacement Blade” on page 6-4
Removing the Failed Blade
To remove a failed blade from an iSR6250 chassis:
1. Log all iSCSI initiators out of the iSR6250 blade you are replacing prior to
replacing the iSR6250 router blade.
2. Disconnect all cables from the iSR6250 blade you are replacing. This
includes Fibre Channel, iSCSI, management, Ethernet, and serial cables.
Figure 6-1 iSR6250 Router Blade with Cables Disconnected