Filter
Top Products
Introduction
iSR6250 Router Blades
1-6 SN0051103-00 A
S
Router Blade LEDs
Each chassis blade provides LEDs and connectors that face the front of the
chassis and may provide additional ports, depending on its model. The router
blade LEDs shown in Figure 1-6 provide information about the router’s operational
status. These LEDs include the heartbeat LED, the system fault LED, and the
input power LED. The blade also includes a recessed beacon indicator used to
locate the physical blade monitored using the SANsurfer Router Manager.
Figure 1-6 Router Blade LEDs
Heartbeat LED (Green)
The heartbeat LED blinks once a second as long the router firmware is
operational.
System Fault LED (Amber)
The system fault LED lights up to show that a fault exists in the router firmware or
hardware. Fault conditions include POST errors and over-temperature conditions.
The LED shows a blink code for POST errors and the over temperature condition.
See Figure 1-6 and Tab le 1-2 .
Table 1-2. System Fault LED Blink Patterns
System
Fault LED
Condition
OFF OK (operational)
3 Blinks System error
4 Blinks Management port IP address conflict
5 Blinks Over temperature
1 Blink Beacon - synchronized with the heartbeat LED
MGMT IOIOI
FC1 FC2 GE1 GE1
GE4 GE3 iSR6240
Intelligent Storage Router
iSR6200 System
10GbE1 iSR6250
Intelligent Storage Router
10GbE2
Power LEDSystem Fault LEDHeartbeat LED
Beacon Indicator