Command Descriptions
TDS Family Oscilloscope Programmer Manual
2–115
DISplay:COLOr:MAP:<item name>: BYCONTents
TDS 6X4B & 700C Only
Determines if the color for a math or reference waveform is set to the color
assigned to the waveform contents (the constituent waveform) or to a specific
color index. This is equivalent to pressing Map Math Colors or Map Reference
Colors on the Color main menu and Color Matches Contents (to select the on
state) or Color (to select the off state) on the resulting side menu.
Display
DISplay:COLOr:MAP:{ MATH1 | MATH2 | MATH3 | REF1 | REF2 | REF3 |
REF4 }:BYCONTents { OFF | ON | <NR1> }
DISplay:COLOr:MAP:{ MATH1 | MATH2 | MATH3 | REF1 | REF2 | REF3 |
REF4 }:BYCONTents?
DISplay
:
COLOr MAP
: :
REF4
REF3
REF1
MATH2
MATH3
REF2
:
BYCONTents
MATH1
ON
<Space>
?
<NR1>
OFF
<OFF> or <NR1> = 0 means set the color by index (NOT by contents).
<ON> or <NR1> 0 means set the color by contents (NOT by index).
DISPLAY:COLOR:MAP:MATH1:BYCONTENTS ON
sets the display of math waveform # 1 to the color of the waveform used to
define math waveform # 1. If two waveforms were used to defined math
waveform # 1, then the color of the first mentioned waveform is used.
DISPLAY:COLOR:MAP:MATH1:BYCONTENTS?
might return ON.
Group
Syntax
Arguments
Examples