Filter
Top Products
Command Groups
2–16
TDS Family Oscilloscope Programmer Manual
Table 2–8: Cursor Commands (Cont.)
Header Description
CURSor:PAIred Positions paired cursors. Also, returns settings
CURSor:PAIred:HDELTA? Return horizontal distance between 1
st
and
2
nd
paired cursors
CURSor:PAIred:HPOS1? Return horizontal position of 1
st
paired cursor
CURSor:PAIred:HPOS2? Return horizontal position of 2
nd
paired cursor
CURSor:PAIred:POSITION<x> Set or return vbar position of the1
st
or 2
nd
paired cursor
CURSor:PAIred:POSITION<x>Pcnt
(TDS 400A)
Position the horizontal paired cursor in units of
% of record length
CURSor:PAIred:SELect Select active paired cursor
CURSor:PAIred:UNITS Set paired cursor units
CURSor:PAIred:VDELTA? Return vertical distance between 1
st
and 2
nd
paired cursors
CURSor:VBArs Position vertical bar cursors
CURSor:VBArs:DELTa? Return horizontal distance between cursors
CURSor:VBArs:POSITION<x> Position a vertical cursor
CURSor:VBArs:POSITION<x>Pcnt
(TDS 400A)
Position a vertical cursor in units of % of
record length
CURSor:VBArs:SELect Set which cursor the knob controls
CURSor:VBArs:UNITS Set vertical cursors to seconds, frequency, or
to lines (with option 05 video on the TDS
510A, 500C, 600B, & 700C)
CURSor:VBArs:UNITSTring (TDS 400A) Return unit string for the vertical bar cursor
Display Commands
Display commands let you change the graticule style, change the displayed
intensities, display messages, and clear the menu. Table 2–9 lists these com-
mands.
Table 2–9: Display Commands
Header Description
CLEARMenu Clear menus from display
DISplay? Return display settings
DISplay:CLOCk Control the display of the date/time stamp