Filter
Top Products
Command Descriptions
2–364
TDS Family Oscilloscope Programmer Manual
Zoom
ZOOm:HORizontal:POSition <NR3>
ZOOm:HORizontal:POSition?
?
<Space> <NR3>
ZOOm
:
:
HORizontal POSition
<NR3> is from 0 to 100, and is the percent of the waveform or extended
acquisition that is to the left of graticule.
ZOOM:HORIZONTAL:POSITION 50
centers the waveform on the display.
ZOOm:HORizontal:SCAle
Sets or queries the horizontal expansion factor. This command is equivalent to
using the front-panel Horizontal Scale knob when Zoom is on. It is also
equivalent to using Zoom Preview with the upper graticule selected in the
TDS 500C, 600B or 700C.
Zoom
ZOOm:HORizontal:SCAle <NR3>
ZOOm:HORizontal:SCAle?
?
<Space> <NR3>
ZOOm :
:
HORizontal SCAle
<NR3> is the amount of expansion in the horizontal direction.
It is less than 1 if there is horizontal compression.
It is more than 1 if there is horizontal expansion.
ZOOM:HORIZONTAL:SCALE?
might return 1.00E+0 as the horizontal scale factor.
Group
Syntax
Arguments
Examples
Group
Syntax
Arguments
Examples