Filter
Top Products
Command Descriptions
TDS Family Oscilloscope Programmer Manual
2–269
TRIGger:DELay:EDGE:SLOpe { RISe | FALL }
TRIGger:DELay:EDGE:SLOpe?
:
DELay
TRIGger
EDGE
:
<Space>
?
FALL
: SLOpe
RISe
FALL specifies to trigger on the falling or negative edge of a signal.
RISe specifies to trigger on the rising or positive edge of a signal.
TRIGGER:DELAY:EDGE:SLOPE?
might return RISE, indicating that the delayed trigger occurs on the rising edge.
TRIGger:DELay:EDGE:SOUrce
Selects the source for the delayed trigger. This command is equivalent to
selecting Source in the Delayed Trig menu.
Trigger
TRIGger:DELay:EDGE:SOUrce { AUXiliary (not available on TDS 520C &
724C) | CH<x> }
TRIGger:DELay:EDGE:SOUrce?
:
DELay
TRIGger
EDGE
<Space>
?
: SOUrce
AUXiliary
:
CH
<x>
AUXiliary specifies an external trigger using the Auxiliary Trigger Input
connector that is located on the rear panel of the instrument. The TDS 520C &
724C do not have an Auxiliary Trigger input and so do not support this
argument.
Syntax
Arguments
Examples
Group
Syntax
Arguments