Command Descriptions
TDS Family Oscilloscope Programmer Manual
2–63
<NR1> 0 specifies the number of data points. Table 2–26 shows the number of
data points supported for reference locations by TDS model. In the TDS 500C
and 600B all invalid values less than the maximum will be forced to the next
highest valid value, and those higher than the maximum will be forced to the
maximum. For example, 15002 points on a TDS 520C with option 1M will
allocate 50000 points of data for the reference. No complete references are stored
for 500000 data points in the TDS 500C and TDS 700C.
Table 2–26: Waveform Data Points Supported for Reference Locations
Configuration
TDS 420A,
TDS 430A,
TDS 460A
TDS 510A,
TDS 520C,
TDS 724C,
TDS 600B
TDS 540C,
TDS 754C,
TDS 784C
Standard 500,
1000,
2500,
5000,
15000,
30000 (4 refs)
500,
1000,
2500,
5000,
15000
50000
500,
1000,
2500,
5000,
15000
500,
1000,
2500,
5000,
15000,
50000 (4 refs)
Option 1M
(not on the TDS
510A)
or 2M
(TDS 500C &
700C only)
60000 (2 refs),
120000 (1 ref)
TDS 520C &
724C only:
75000 (3 refs),
100000 (2 refs),
130000 (2 refs),
250000 (1 ref)
75000 (3 refs),
100000 (2 refs),
130000 (2 refs),
250000 (1 ref)
500000 (no
complete refs)
ALLOCATE:WAVEFORM:REF2 1000
reserves 1,000 data points for REF2.
ALLOCATE:WAVEFORM:REF1?
might return 500
APPMenu
Displays the user-definable Application menu, and the query returns the current
Application menu labels and title. This is equivalent to pressing the front-panel
APPLICATION button.
Application Menu
CLEARMenu, *ESR, EVENT?
APPMenu ACTivate
Examples
Group
Related Commands
Syntax