Filter
Top Products
Command Descriptions
TDS Family Oscilloscope Programmer Manual
2–245
*OPT?
OPT?
Might return: 13:Rs232/cent,1M:extended record length,
2F:math pack,05:video trigger,0,CD:color display.
PASSWord (No Query Form)
Enables the *PUD and NEWpass set commands. Sending PASSWord without
any arguments disables these same commands. Once the password is successful-
ly entered, the *PUD and NEWpass commands are enabled until the digitizing
oscilloscope is powered off, or until the FACtory command, the PASSWord
command with no arguments, or the *RST command is issued.
To change the password, you must first enter the valid password with the
PASSWord command and then change to your new password with the NEWpass
command. Remember that the password is case sensitive.
Miscellaneous
NEWpass, *PUD
PASSWord
PASSWord <QString>
<QString>
PASSWord
<Space>
<QString> is the password and can include up to 10 characters. The factory
default password is “XYZZY”and is always valid.
PASSWORD "XYZZY"
Enables the *PUB and NEWpass set commands.
PASSWORD
Disables the *PUD and NEWpass set commands. You can still use the query
version of *PUD.
Examples
Group
Related Commands
Syntax
Arguments
Examples