Filter
Top Products
Command Descriptions
TDS Family Oscilloscope Programmer Manual
2–347
WFMPRE:BIT_NR?
might return 8, indicating that there are 8 bits per waveform point.
WFMPre:BN_Fmt
Sets or queries the format of binary data for the first ordered waveform as
specified by the DATa:SOUrce command.
Waveform
DATa:ENCdg, WFMPre:BYT_Or, WFMPre:ENCdg
WFMPre:BN_Fmt { RI | RP }
WFMPre:BN_Fmt?
WFMPre
<Space>
?
RI
:
BN_Fmt
RP
RI specifies signed integer data-point representation.
RP specifies positive integer data-point representation.
WFMPRE:BN_FMT RP
specifies that the binary waveform data are positive integer data-points.
WFMPRE:BN_FMT?
returns either RI or RP as the current waveform data format.
WFMPre:BYT_Nr
Sets or queries the binary field data width for the first ordered waveform as
specified by the DATa:SOUrce command. This command is equivalent to the
DATa:WIDth command.
Waveform
DATa:WIDth, WFMPre:BIT_Nr
Examples
Group
Related Commands
Syntax
Arguments
Examples
Group
Related Commands