Filter
Top Products
Command Descriptions
2–348
TDS Family Oscilloscope Programmer Manual
WFMPre:BYT_Nr <NR1>
WFMPre:BYT_Nr?
?
<Space> <NR1>
WFMPre :
BYT_Nr
<NR1> is the number of bytes per point and can be 1 or 2.
WFMPRE:BYT_NR 2
specifies that there are 2 bytes per waveform data point.
WFMPre:BYT_Or
Selects which byte of binary waveform data is transmitted first during a
waveform data transfer when DATa:WIDth (or WFMPre:BYT_Nr) is set to 2.
Waveform
DATa:ENCdg, WFMPre:BN_Fmt, WFMPre:ENCdg
WFMPre:BYT_Or { LSB | MSB }
WFMPre:BYT_Or?
WFMPre
<Space>
?
LSB
:
BYT_Or
MSB
LSB selects the least significant byte to be transmitted first.
MSB selects the most significant bye to be transmitted first.
WFMPRE:BYT_OR MSB
specifies that the most significant byte in the waveform data will be transferred
first.
WFMPRE:BYT_OR?
returns either MSB or LSB depending on which data byte is transferred first.
Syntax
Arguments
Examples
Group
Related Commands
Syntax
Arguments
Examples