Filter
Top Products
Command Descriptions
2–184
TDS Family Oscilloscope Programmer Manual
ON or <NR1> 0 turns on the hardcopy operation for the waveform when any
waveform data exceeds the limits set by the limit test.
OFF or <NR1> = 0 turns off the hardcopy operation.
LIMit:HARDCopy ON
specifies that the hardcopy operation occurs for the waveform when any
waveform data exceeds the limits specified in the limit test.
LIMit:HARDCopy?
returns either 0 or 1, indicating whether the hardcopy operation occurs for the
waveform when any waveform data exceeds the limits specified in the limit test.
LIMit:STATE
Turns limit testing on or off, or queries whether limit testing is in effect.
When extended–acquisition–length mode or InstaVu mode is on, this command
can still set and return values. However, this feature will not actually function.
You cannot turn limit:state to on when extended–acquisition-length mode is
already on.
Limit Test
CURve, LIMit:BELl, LIMit:COMPARE:CH<x>, LIMit:HARDCopy, LIM-
it:TEMPLate, WFMPre
LIMit:STATE { OFF | ON | <NR1> }
LIMit:STATE?
:LIMit STATE
ON
<Space>
?
<NR1>
OFF
OFF or <NR1> = 0 turns off limit testing.
ON or <NR1> 0 turns on limit testing.
Arguments
Examples
Group
Related Commands
Syntax
Arguments