Filter
Top Products
Command Descriptions
2–270
TDS Family Oscilloscope Programmer Manual
CH<x> specifies one of the input channels.
TRIGGER:DELAY:EDGE:SOURCE CH1
selects channel 1 as the input source for the delayed trigger.
TRIGger:DELay:EVENTS? (Query Only)
Returns the current delayed trigger event parameter.
Trigger
TRIGger:DELay:EVENTS?
:
DELay
TRIGger
:
EVENTS
?
TRIGGER:DELAY:EVENTS?
might return :TRIGGER:DELAY:EVENTS:COUNT 2
TRIGger:DELay:EVENTS:COUNt
Sets or queries the number of events that must occur before the delayed trigger
occurs when TRIGger:DELay:BY is set to EVENTS. This is equivalent to
setting the Delay by Events count in the Delayed Edge Delay side menu.
Trigger
TRIGger:DELay:EVENTS:COUNt <NR1>
TRIGger:DELay:EVENTS:COUNt?
?
<Space>
<NR1>
COUNt
:
DELay
TRIGger
:
EVENTS
:
<NR1> is the number of delayed edge trigger events. The TDS 400A range is 1 to
(10E7 –1). The TDS 510A, 500C, 600B, and 700C range is 2 to 10E7.
Examples
Group
Syntax
Examples
Group
Syntax
Arguments