Electrolux 180 Welder User Manual


 
air-o-chill
®
Useful tips for Blast Chilling
With the new Electrolux air-o-chill
®
Blast chiller/freezer it is not necessary
to pre-chill appliance prior to loading and starting of cycle for most products.
Very small items may require air-o-chill
®
to be turned on approx.
5 minutes prior to loading. This enables the “Prep” cycle to run then
the chilling process will start.
Remember to always have the plug in place – in the drain outlet inside cavity.
Check the pull out plastic tray under the appliance prior to using each
day – tip out any water and clean with detergent and replace.
The drain outlet can also be connected using a hose to a floor drain for
convenience.
80 electrolux user guide