Filter
Top Products
9
Sensor I® Expert User Manual
5. Digital Display
Provides a digital readout of parameters selected:
A) These segments show the item being displayed on the main display:
Pk is peak torque
An is angle
Ld not used
Tq is dynamic torque
B) These segments indicate limits:
LT is low torque limit
HT is high torque limit
LA is low angle limit
HA is high angle limit
C) These segments will light when serial data during tightening or serial data at
the end of tightening are selected. They will also flash when data is being sent
through the serial port.
RX = receiving, TX = transmitting
D) This segment will light when CCW ("-LEF") has been selected.
E) These segments display the values of torque and angle.
F) These segments light when statistical information is being shown on the
display.