Filter
Top Products
Sensor I® Expert User Manual
NOTE
The wrench should only be used for its intended purpose, i.e., for
tightening, loosening and auditing purposes. It should be operated
using a smooth steady pull at moderate speed on the wrench handle
with both feet firmly placed on floor. Specifications apply to the
wrench only (without additional apparatus). Accuracies cannot be
specified when the wrench is used with torque multipliers or if the
wrench is operated incorrectly.
NOTE
The used of universal joints is not recommended. Use of such devices
may cause inaccuracies in torque and/or angle measurements. The use
of extensions to the handle, or application of force to other parts of the
wrench may cause damage, result in personal injury, or may result in
inaccurate tightenings.
NOTE
Exceeding the maximum torque noted on the wrench may cause damage
to wrench or loss of calibration.
NOTE
Always make sure that the socket is fully engaged on the joint before
tightening begins. Failure to do so may cause inaccuracies in torque
and/or angle measurements.