Filter
Top Products
63
Sensor I® Expert User Manual
End of Tightening Data Dump
Tightening Configuration No : Torque Control Mode
Torque Units : Nm
Load Units : kN
External channel : Load Cell
Angle Transducer : Non Contact Angle Measurement
Multiplier : 1.00
Serial data during tightening : Off
Serial data at end of tightening : Off
Tightening Direction : Clockwise
Control Strategy : Torque Control
Target Value : 0020
Snug Torque : 0010
Low Torque Limit : 0015
High Torque Limit : 0025
Low Angle Limit : 0020
High Angle Limit : 0040
End of Tightening data :
T,0020.4 A,0029 E,0000
T,0020.7 A,0032 E.0000
T,0020.9 A,0032 E,0000
T,0020.1 A,0032 E,0000
T,0020.9 A,0035 E,0000