Filter
Top Products
62
Sensor I® Expert User Manual
Appendix A
These reports are accessed by the methods noted in "Data Storage and
Retrieval". The information provided by the optional InterLink software will
have a different format.
Sample Reports
Parameter Dump
Tightening Configuration No : Torque Control Mode
Torque Units : Nm
Load Units : kN
External channel : Load Cell
Angle Transducer : Non Contact Angle Measurement
Multiplier : 1.00
Serial data during tightening : Off
Serial data at end of tightening : Off
Tightening Direction : Clockwise
Control Strategy : Torque Control
Target Value : 0020
Snug Torque : 0010
Low Torque Limit : 0020
High Torque Limit : 0020
Low Angle Limit : 0000
High Angle Limit : 0000