Filter
Top Products
44
Sensor I® Expert User Manual
and stillness of the wrench when it is reset. The shorter the tightening
period, the smaller the error will be. The more stable the wrench is at reset,
the smaller the error. See the Application Guidelines at the front of this
manual for additional guidelines.
1. Press the Reset button to power up the wrench.
2. Move the Mode Selection switch to Setup.
3. With the Reset button held in, use the Parameter Adjustment Knob to
select the Custom Setup Mode #214. The main display shows a number
between 4 and 10.
4. Release the Reset button and turn the Parameter Adjustment Knob to
increase shown if the reset is to be made less sensitive. Turn the Param-
eter Adjustment Knob to decrease the number shown if increased mea-
surement accuracy is required making wrench reset more sensitive.
5. Press and hold the Reset Button and rotate the Parameter Adjustment
Knob counterclockwise until the Custom Setup Mode number is below
20.
6. Release the Reset button. The reset adjustment is now saved.
7. Move the Mode Selection switch to one of the tightening modes and test
the reset.