Filter
Top Products
67
Sensor I® Expert User Manual
Appendix B
Custom Modes
Custom Modes 1 through 20 are the Custom Tightening modes. They are
memory locations used to store tightening strategies for later recall.
Custom Modes 100 through 120 are the Custom Setup Modes and are used
for both advanced option selection performing calibration. The Custom
Setup Modes are:
Custom Mode Function
100 Serial data out at end of tightening.
101 Serial data out during tightening.
102 Not used.
103 Tightening direction.
104 Torque multiplier enable/disable.
105 Not used.
106 Not used.
107 Torque Units selection.
108 Not used.
109 Tightening mode parameter upload via serial port.
110 Serial baud rate selection.
111 Stored tightening curve upload via serial port.
112 Not used.
113 Temperature display/calibration.
114 Torque calibration.
115 Not used.
116 External channel setup/calibration for load cell.
117 External channel setup/calibration for torque cell
118 Not used.
119 Angle Reference Arm setup/calibration.
120 EZ Angle sensor setup/calibration.