Filter
Top Products
OPERATION
B-15 B-15
RANGER 300 D AND 300 DLX
Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC
Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC
SUMMARY OF WELDING PROCESSES AND MACHINE SETTINGS
TABLE B.3
SUMMARY OF WELDING PROCESSES FOR RANGER 300 DLX
CONTROL
CABLE &
DIAGRAM
IDLE
MODE
OUTPUT
CONTROL
SWITCH
WELDING
TERMINALS
SWITCH
ELECTRODE
WHEN NOT
WELDING
TO START WELDING
PROCESS
STICK - CC
CARBON ARC
GOUGING - CC
TIG - CC
K930-1 TIG MODULE /
K936-1 CONTROL
CABLE
WIRE FEED - CV,
LN-25 WITH 42V RE-
MOTE CONTROL KIT
WIRE FEED - CV,
LN-25 WITH
INTERNAL
CONTACTOR
WIRE FEED - CV,
LN-742
WIRE FEED - CV,
LN-7 or LN-8
K487-15 WIRE FEED-
CV SPOOL GUN / K488
CONTROL MODULE
Touch electrode to work.
Welding starts immediately
and engine goes to high idle.
Press Amptrol. Welding
starts immediately.
Press gun trigger, Ranger
300 DLX contactor closes.
Welding starts immediately
and engine goes to high idle.
Press gun trigger, LN-25
contactor closes. Welding
starts immediately and
engine goes to high idle.
Press gun trigger, Ranger
300 DLX contactor closes.
Welding starts immediately
and engine goes to high idle.
Press gun trigger, Ranger
300 DLX contactor closes.
Welding starts immediately.
Press gun trigger, Ranger
300 DLX contactor closes.
Welding starts immediately.
NO
YES
S23732-9
YES
S23732-3
NO
S23732-1
S23732-2
YES
S23732-5
YES
S23732-4
S23732-6
YES
S23732-8
AUTO
AUTO
AUTO
AUTO
AUTO
HIGH
HIGH
AT
WELDER
REMOTE
REMOTE
AT
WELDER
REMOTE
REMOTE
AT
WELDER
ALWAYS
ON
REMOTE
REMOTE
ALWAYS
ON
REMOTE
REMOTE
REMOTE
HOT
COLD
COLD
COLD
COLD
COLD
COLD