Filter
Top Products
Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC
Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC
INSTALLATION
A-2 A-2
RANGER 300 D AND 300 DLX
TECHNICAL SPECIFICATIONS - RANGER 300 D AND 300 DLX
INPUT - DIESEL ENGINE
Starting
Manufacturer Description Speed Displacement System Capacities
KUBOTA 3 cyl., 3600 RPM 54.9 cu. in. Electric Fuel: 10 gal. (38 L)
D905B-2 liquid-cooled Full load (898 cc) 12 VDC
diesel battery Oil: 5.4 qt. (5.1 L)
26 HP @ 3700 RPM
3600 RPM High idle
Cooling system:
2150 RPM 5.7 qts. (5.4 L)
Low idle
RATED OUTPUT - WELDER
Duty Cycle Amps Volts at Rated Amperes
100% Duty Cycle 300 DC Constant Current 25
100% Duty Cycle 300 AC Constant Current 25
100% Duty Cycle 200 DC Constant Voltage (300 D) 20
60%
(1)
300 DC Constant Voltage (300 DLX) 30
100% 280 DC Constant Voltage (300 DLX) 30
OUTPUT - WELDER AND GENERATOR
Max. Open Auxiliary Power for
Welding Ranges Circuit Voltage Auxiliary Power
(2)
Wire Feeders
40 - 300 Amps 80 Volts RMS 12,000 Continuous Watts 42V, 60 Hz, 8 Amps
(3)
Constant Current @ 3700 RPM 60 Hz, 120/240 VAC
100% Duty Cycle 120V, 60 Hz, 8 Amps
(3)
PHYSICAL DIMENSIONS
Height Width Depth Weight
37.38 in. 24.75 in. 60.50 in. 1093 lbs. (300 D)
949.4 mm 628.7 mm 1528.6 mm 1133 lbs. (300 DLX)
480.8 kg (300 D)
499.0 kg (300 DLX)
(1)
Duty cycle is based on a 10-minute period. The machine can be loaded to 300 amps for 6 minutes out of every 10-minute period.
(2)
Output rating in watts is equivalent to volt-amperes at unity power factor. Output voltage is within ±10% at all loads up to rated capacity.
When welding, available auxiliary power will be reduced.
(3)
Ranger 300 DLX only.