Filter
Top Products
To Ensure Safe Use
8
WARNING
Connect to an electrical outlet that com-
plies with this machine’s ratings (for volt-
age, frequency, and current).
Incorrect voltage or insufficient current may
cause fire or electrical shock.
Never use out of doors or in any location
where exposure to water or high humid-
ity may occur. Never touch with wet hands.
Doing so may result in fire or electrical shock.
Never allow any foreign object to get in-
side. Never expose to liquid spills.
Inserting objects such as coins or matches or
allowing beverages to be spilled into the venti-
lation ports may result in fire or electrical shock.
If anything gets inside, immediately disconnect
the power cord and contact your authorized
Roland DG Corp. dealer.
Never place any flammable object nearby.
Never use a combustible aerosol spray
nearby. Never use in any location where
gases can accumulate.
Combustion or explosion may be a danger.
Handle the power cord, plug, and electri-
cal outlet correctly and with care. Never
use any article that is damaged.
Using a damaged article may result in fire or
electrical shock.
Danger of electrical short, shock, electrocution, or fire
WARNING
When using an extension cord or power
strip, use one that adequately satisfies the
machine’s ratings (for voltage, frequency,
and current).
Use of multiple electrical loads on a single elec-
trical outlet or of a lengthy extension cord may
cause fire.
When the machine will be out of use for a
prolonged period, disconnect the power
cord.
This can prevent accidents in the event of cur-
rent leakage or unintended startup.
Connect to ground.
This can prevent fire or electrical shock due to
current leakage in the event of malfunction.
Position so that the power plug is within
immediate reach at all times.
This is to enable quick disconnection of the
power plug in the event of an emergency. Install
the machine next to an electrical outlet. Also,
provide enough empty space to allow immedi-
ate access to the electrical outlet.
Never use cutting oil.
This machine is not designed for the flow of
cutting oil. Oil may get inside the machine and
cause fire or electrical shock.
Never use a pneumatic blower.
This machine is not compatible with a pneumatic
blower. Cutting waste may get inside the ma-
chine and cause fire or electrical shock.
If sparking, smoke, burning odor, unusual
sound, or abnormal operation occurs, im-
mediately unplug the power cord. Never
use if any component is damaged.
Continuing to use the machine may result in fire,
electrical shock, or injury. Contact your autho-
rized Roland DG Corp. dealer.
Ratings